make the code compatible with UNOs

fakeStation/fakeStation.ino

@@ -3,14 +3,16 @@
 #include <CModemLoRa.h>
 #include <CProtocol12Bytes.h>
 
+//#define Serial SerialUSB
+
 CProtocol12Bytes protocol;
 CModemLoRa thisLoRa;
 
 uint16_t incrTS=0x0000;
 
 void setup() {
-  SerialUSB.begin(9600);
+  Serial.begin(9600);
-  SerialUSB.println("LoRa Sender");
+  Serial.println("LoRa Sender");
   
   thisLoRa.begin();
   protocol.codeFrame(0x0A,0x00,0x0000,0x00FF,0x5BA2,0x0D4C,0x929A); // Name : LORA-TEST1 or 0x929A for *2
@@ -28,27 +30,27 @@ void loop()
   incrTS = protocol.getTimestampMessage()+1;
   protocol.setTimestampMessage(incrTS);
 
-  SerialUSB.print("ID = ");
+  Serial.print("ID = ");
-  SerialUSB.print(protocol.getStationId(),HEX);
+  Serial.print(protocol.getStationId(),HEX);
-  SerialUSB.println(protocol.getGatewayId(),HEX);
+  Serial.println(protocol.getGatewayId(),HEX);
-  SerialUSB.print("TS = ");
+  Serial.print("TS = ");
-  SerialUSB.println(protocol.getTimestampMessage(),HEX);
+  Serial.println(protocol.getTimestampMessage(),HEX);
-  SerialUSB.print("DT = ");
+  Serial.print("DT = ");
-  SerialUSB.println(protocol.getDataType(),HEX);
+  Serial.println(protocol.getDataType(),HEX);
-  SerialUSB.print("D1 = ");
+  Serial.print("D1 = ");
-  SerialUSB.println(protocol.getDataOne(),HEX);
+  Serial.println(protocol.getDataOne(),HEX);
-  SerialUSB.print("D2 = ");
+  Serial.print("D2 = ");
-  SerialUSB.println(protocol.getDataTwo(),HEX);
+  Serial.println(protocol.getDataTwo(),HEX);
-  SerialUSB.print("D3 = ");
+  Serial.print("D3 = ");
-  SerialUSB.println(protocol.getDataThree(),HEX);
+  Serial.println(protocol.getDataThree(),HEX);
 
   for(int i=0; i<3; i++){
-      SerialUSB.println("Frame sent !");
+      Serial.println("Frame sent !");
       LoRa.beginPacket();
       LoRa.write((uint8_t*)&protocol, 12);
       LoRa.endPacket();
     
-      SerialUSB.println("-----------------------------");
+      Serial.println("-----------------------------");
       delay(4000);
     }
     delay(10000);