maj

ETH_MYSQL/ETH_MYSQL.ino

@@ -1,76 +0,0 @@
-/*
-  Arduino leonardo eth v3 and mysql 
-  This example demonstrates how to store data in a
-  table in mysql from 4 button connected to pins 2, 3, 4, 5 
-  For this, we will create a special database and table for testing.
-  The following are the SQL commands you will need to run in order to setup
-  your database for running this sketch.
-
-  CREATE DATABASE machine;
-  CREATE TABLE machine.state (
-    num integer primary key auto_increment,
-    message char(40),
-    recorded timestamp
-  );
-
-  Here we see one database and a table with three fields; a primary key that
-  is an auto_increment, a string, and a timestamp. This will demonstrate how
-  to save a date and time of when the row was inserted, which can help you
-  determine when data was recorded or updated.
-
-  INSTRUCTIONS FOR USE
-
-  1) Create the database and table as shown above.
-  2) Change the address of the server to the IP address of your MySQL server in my case my IP is 192.186.157.77
-  3) Change the user and password to a valid MySQL user and password in my case it is sa and 156444
-  4) install mysql library in your ide go to sketch > include library > manage library
-  and in the filter your search type mysql then install it
-  5) arduino leonardo use etehrnet2 library so you need to install it in your ide go to sketch > include library > manage library
-  and in the filter your search type ethernet2 then install it
-  6) also you need to modify this file MySQL_Packet.h the original created by Dr.Charles is - include <Ethernet.h> 
-  the new is - include <Ethernet2.h> otherwise it will give your error message and not compiled  
-  7) Connect a USB cable to your Arduino
-  8) Select the arduino leonardo eth board and port 
-  9) Compile and upload the sketch to your Arduino
-  10) connect 4 push button between ground and pins 2, 3, 4, 5 through 10k Ohm resistor 
-  11) After the sketch has run for some time , press some push buttons and open a mysql client and issue
-     the command: SELECT * FROM machine.state; to see the data
-     recorded. Note the field values and how the database handles both the
-     auto_increment and timestamp fields for us. You can clear the data with.
-      "DELETE FROM machine.state".
-
-  Note: The MAC on your board in back if not you can put any thing but make sure it is unique in your network .
-  Note your mysql default port address is 3306 but this will conflict with Skype so you can change it to 3307 in both your 
-  sketch and your Mysql and make sore this port is open in your server firewall .
-
-  Created by: Samir Mohamad tawfik 28-1-2018
-  samirtwf@gmail.com
-*/
-
-#include <Ethernet2.h>
-#include <MySQL_Connection.h>
-#include <MySQL_Cursor.h>
-
-byte mac_addr[] = { 0x90, 0xA2, 0xDA, 0x10, 0xBD, 0x8C };
-
-IPAddress server_addr(192,168,1,100);  // IP of the MySQL *server* here
-char user[] = "gateway";              // MySQL user login username
-char password[] = "password";        // MySQL user login password
-
-EthernetClient client;
-MySQL_Connection conn((Client *)&client);
-
-void setup() {
-  EthernetClass(mac_addr);
-   if (conn.connect(server_addr, 3306, user, password)) {
-    delay(1000);
-  }
- }
-void loop() {
-  delay(1000);  
-  char INSERT_SQL[] = "INSERT INTO machine.state (message) VALUES ('machine one on')";
-  MySQL_Cursor *cur_mem = new MySQL_Cursor(&conn);
-  cur_mem->execute(INSERT_SQL);
-  delete cur_mem;
-  delay(1000); 
- }

arduino vers arduino/COM_UART_ARDUINO/Communication between Genuino Zero and Arduino Uno using UART.url

@@ -0,0 +1,5 @@
+[{000214A0-0000-0000-C000-000000000046}]
+Prop3=19,11
+[InternetShortcut]
+IDList=
+URL=https://arduino.stackexchange.com/questions/36663/communication-between-genuino-zero-and-arduino-uno-using-uart

arduino vers arduino/COM_UART_ARDUINO/connection.txt

@@ -0,0 +1,5 @@
+Genuino Zero (RX) pin 0 ---------------- Arduino Uno pin 11
+
+Genuino Zero (TX) pin1 ---------------- Arduino Uno pin 10
+
+Ground ---------------------------------- Ground

arduino vers arduino/COM_UART_ARDUINO/receiver/receiver.ino

@@ -0,0 +1,47 @@
+#include <SoftwareSerial.h>
+SoftwareSerial mySerial(10, 11); // RX, TX
+
+/* Use a variable called byteRead to temporarily store
+   the data coming from the computer */
+
+byte byteRead;
+
+void setup() {
+  Serial.begin(9600);
+  mySerial.begin(9600);
+  pinMode(LED_BUILTIN, OUTPUT);
+}
+
+void loop() {
+   char a[8];
+   /*  check if data has been sent from the computer: */
+  if (Serial.available()) 
+  {
+    /* read the most recent byte */
+    byteRead = Serial.read();
+    //a[0] = atoi(byteRead);
+    //a[1] = atoi(byteRead);
+    Serial.print("rushin\r\n");
+    /*ECHO the value that was read, back to the serial port. */
+     if(byteRead == 0x61)
+     {
+    digitalWrite(LED_BUILTIN, HIGH);
+    Serial.write(byteRead);
+     }
+  }
+
+  if (mySerial.available()) 
+  {
+    /* read the most recent byte */
+    byteRead = mySerial.read();
+    //a[0] = atoi(byteRead);
+  //  a[1] = atoi(byteRead);
+  mySerial.print("rushin\r\n");
+    /*ECHO the value that was read, back to the serial port. */
+     if(byteRead == 0x61)
+     {
+    digitalWrite(LED_BUILTIN, HIGH);
+    mySerial.write(byteRead);
+     }
+  }
+}

arduino vers arduino/COM_UART_ARDUINO/transmitter/transmitter.ino

@@ -0,0 +1,21 @@
+/*
+  DigitalReadSerial
+ Reads a digital input on pin 2, prints the result to the serial monitor
+ */
+
+// digital pin 2 has a pushbutton attached to it. Give it a name:
+int pushButton = 7;
+
+void setup() {
+  Serial.begin(9600);
+  pinMode(pushButton, INPUT);
+}
+
+void loop() {
+  int buttonState = digitalRead(pushButton);
+  //if(buttonState == 1)
+  //{
+  Serial.println("a");
+  //}
+  delay(1000);
+}

arduino vers arduino/communication serie arduino/serie_envoyer/serie_envoyer.ino

@@ -0,0 +1,36 @@
+/*
+  Software serial multple serial test
+
+ Receives from the hardware serial, sends to software serial.
+ Receives from software serial, sends to hardware serial.
+
+ The circuit:
+ * RX is digital pin 10 (connect to TX of other device)
+ * TX is digital pin 11 (connect to RX of other device)
+
+ */
+
+char mavar[7]="bonjour";
+ 
+#include <SoftwareSerial.h>
+
+SoftwareSerial mySerial(10, 11); // RX, TX
+
+void setup() {
+  // Open serial communications and wait for port to open:
+  Serial.begin(57600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+
+  //Serial.println("Goodnight moon!");
+  mySerial.begin(4800); // set the data rate for the SoftwareSerial port
+  mySerial.println("je suis la station");
+}
+
+void loop() {
+  if (mySerial.available()) {
+    Serial.write(mavar);
+  }
+}
+

arduino vers arduino/communication serie arduino/serie_recevoir/serie_recevoir.ino

@@ -0,0 +1,37 @@
+/*
+  Software serial multple serial test
+
+ Receives from the hardware serial, sends to software serial.
+ Receives from software serial, sends to hardware serial.
+
+ The circuit:
+ * RX is digital pin 10 (connect to TX of other device)
+ * TX is digital pin 11 (connect to RX of other device)
+
+ */
+
+char mavar[7];
+ 
+#include <SoftwareSerial.h>
+
+SoftwareSerial mySerial(10, 11); // RX, TX
+
+void setup() {
+  // Open serial communications and wait for port to open:
+  Serial.begin(57600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+
+  //Serial.println("Goodnight moon!");
+  mySerial.begin(4800); // set the data rate for the SoftwareSerial port
+  mySerial.println("je suis la passerelle");
+}
+
+void loop() {
+  if (mySerial.available()) {
+    mavar = mySerial.read();
+  }
+  Serial.println(mavar);
+}
+

arduino vers web/WebServer/WebServer.ino

@@ -0,0 +1,58 @@
+#include <SPI.h>
+#include <Ethernet.h>
+
+// Enter a MAC address and IP address for your controller below.
+// The IP address will be dependent on your local network:
+byte mac[] = {
+  0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED
+};
+IPAddress ip(192, 168, 1, 177);
+
+// Initialize the Ethernet server library
+// with the IP address and port you want to use
+// (port 80 is default for HTTP):
+EthernetServer server(80);
+
+void setup() {
+  // Open serial communications and wait for port to open:
+  Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+
+
+  // start the Ethernet connection and the server:
+  Ethernet.begin(mac, ip);
+  server.begin();
+  Serial.print("server is at ");
+  Serial.println(Ethernet.localIP());
+}
+
+
+void loop() {
+  // listen for incoming clients
+  EthernetClient client = server.available();
+  if (client) {
+    Serial.println("new client");
+    // an http request ends with a blank line
+    boolean currentLineIsBlank = true;
+    while (client.connected()) {
+      if (client.available()) {
+        char c = client.read();
+        Serial.write(c);
+        // if you've gotten to the end of the line (received a newline
+        // character) and the line is blank, the http request has ended,
+        // so you can send a reply
+        if (c == '\n' && currentLineIsBlank) {
+          // send a standard http response header
+          client.println("HTTP/1.1 200 OK");
+          client.println("Content-Type: text/html");
+          client.println("Connection: close");  // the connection will be closed after completion of the response
+          client.println("Refresh: 5");  // refresh the page automatically every 5 sec
+          client.println();
+          
+          }
+    }
+  }
+}
+          }

arduino vers web/WebServer/WebServer/WebServer.ino

@@ -0,0 +1,75 @@
+#include <SPI.h>
+#include <Ethernet.h>
+
+// Enter a MAC address and IP address for your controller below.
+// The IP address will be dependent on your local network:
+byte mac[] = {
+  0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED
+};
+IPAddress ip(192, 168, 1, 177);
+
+// Initialize the Ethernet server library
+// with the IP address and port you want to use
+// (port 80 is default for HTTP):
+EthernetServer server(80);
+void setup() {
+  // Open serial communications and wait for port to open:
+  Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+  // start the Ethernet connection and the server:
+  Ethernet.begin(mac, ip);
+  server.begin();
+  Serial.print("server is at ");
+  Serial.println(Ethernet.localIP());
+}
+
+void loop() {
+  // listen for incoming clients
+  EthernetClient client = server.available();
+  if (client) {
+    Serial.println("new client");
+    // an http request ends with a blank line
+    boolean currentLineIsBlank = true;
+    while (client.connected()) {
+      if (client.available()) {
+        char c = client.read();
+        Serial.write(c);
+        // if you've gotten to the end of the line (received a newline
+        // character) and the line is blank, the http request has ended,
+        // so you can send a reply
+        if (c == '\n' && currentLineIsBlank) {
+          // send a standard http response header
+          client.println("HTTP/1.1 200 OK");
+          client.println("Content-Type: text/html");
+          client.println("Connection: close");  // the connection will be closed after completion of the response
+          client.println("Refresh: 5");  // refresh the page automatically every 5 sec
+          client.println();
+          client.println("<!DOCTYPE html><html lang='fr' class=''><head><meta charset='utf-8'><meta name='viewport' content='width=device-width,initial-scale=1,user-scalable=no'/>");
+          client.println("<style>div,fieldset,input,select{padding:5px;font-size:1em;}input{width:100%;box-sizing:border-box;}select{width:100%;}textarea{resize:none;width:98%;height:318px;padding:5px;overflow:auto;}body{text-align:center;font-family:verdana;background-color: #bcd5ff;}td{padding:0px;}button{border:0;border-radius:0.3rem;background-color:#1fa3ec;color:#fff;line-height:2.4rem;font-size:1.2rem;width:100%;transition-duration:0.4s;}button:hover{background-color:#006cba;}.p{float:left;text-align:left;}.q{float:right;text-align:right;}</style>");
+          client.println("<title>Passerelle LoRa</title>");
+          client.println("</head>");
+          client.println("<body onload='alea()'><script>function alea() {var x = document.getElementById('demo')x.innerHTML = Math.floor((Math.random() * 10) + 1);}</script>");
+          client.println("<div style='text-align:left;display:inline-block;min-width:340px;'><div style='text-align:center;'><h1>Passerelle LoRa</h1></div>");
+          client.println("<div><h2>[Température actuelle]</h2></div>");
+          client.println("<div><p>Nb d'échant's sent = %, Echec sent : %</p></div><div id='l1' name='l1'></div><table style='width:100%'><tr><button onclick='la('?o=1');'>Informations</button></tr><tr><button onclick='alea()'>rafraichir</button></tr><tr><button onclick='la('?o=1');'>Redémarrer</button></tr></table></div>");
+          client.println("</body></html>");
+          break;
+        }
+        if (c == '\n') {
+          // you're starting a new line
+          currentLineIsBlank = true;
+        } else if (c != '\r') {
+          currentLineIsBlank = false;
+        }
+      }
+    }
+    // give the web browser time to receive the data
+    delay(1);
+    // close the connection:
+    client.stop();
+    Serial.println("client disconnected");
+  }
+}
+

arduino vers web/index.html

@@ -1,9 +1,9 @@
 <!DOCTYPE html>
-<html lang="fr" class="">
+<html lang='fr' class=''>
 	<head>
 		<meta charset='utf-8'>
-		<meta name="viewport" content="width=device-width,initial-scale=1,user-scalable=no"/>
+		<meta name='viewport' content='width=device-width,initial-scale=1,user-scalable=no'/>
-    <meta http-equiv="refresh" content="5" />
+		<meta http-equiv='refresh' content='1' />
 		<title>Passerelle LoRa</title>
 		<style>
 			div,fieldset,input,select
@@ -11,6 +11,7 @@
 				padding:5px;
 				font-size:1em;
 			}
+
 			input
 			{
 				width:100%;
@@ -18,10 +19,12 @@
 				-webkit-box-sizing:border-box;
 				-moz-box-sizing:border-box;
 			}
+
 			select
 			{
 				width:100%;
 			}
+
 			textarea
 			{
 				resize:none;
@@ -30,16 +33,19 @@
 				padding:5px;
 				overflow:auto;
 			}
+
 			body
 			{
 				text-align:center;
 				font-family:verdana;
 				background-color: #bcd5ff;
 			}
+
 			td
 			{
 				padding:0px;
 			}
+
 			button
 			{
 				border:0;
@@ -52,15 +58,18 @@
 				-webkit-transition-duration:0.4s;
 				transition-duration:0.4s;
 			}
+
 			button:hover
 			{
 				background-color:#006cba;
 			}
+
 			.p
 			{
 				float:left;
 				text-align:left;
 			}
+
 			.q
 			{
 				float:right;
@@ -68,12 +77,10 @@
 			}
 		</style>
 	</head>
-
 	<body onload='alea()'>
 		<script>
 			function alea() {
-        var x = document.getElementById("demo")
+				var x = document.getElementById('demo')x.innerHTML = Math.floor((Math.random() * 10) + 1);
-        x.innerHTML = Math.floor((Math.random() * 10) + 1);
 			}
 		</script>
 		<div style='text-align:left;display:inline-block;min-width:340px;'>
@@ -84,20 +91,20 @@
 				<h2>[Température actuelle]</h2>
 			</div>
 			<div>
-
+				<p>
-        <p>Nombre d'échantillons envoyés = %, Echec d'envoi : %</p>
+					Nombre d'échantillons envoyés = %, Echec d'envoi : %
-
+				</p>
 			</div>
 			<div id='l1' name='l1'></div>
 			<table style='width:100%'>
 				<tr>
-					<button onclick='la("?o=1");'>Informations</button>
+					<button onclick='la('?o=1');'>Informations</button>
 				</tr>
 				<tr>
 					<button onclick='alea()'>rafraichir</button>
 				</tr>
 				<tr>
-					<button onclick='la("?o=1");'>Redémarrer</button>
+					<button onclick='la('?o=1');'>Redémarrer</button>
 				</tr>
 			</table>
 		</div>

lora vers arduino/LoRaReceiver/LoRaReceiver.ino

@@ -0,0 +1,32 @@
+#include <SPI.h>
+#include <LoRa.h>
+
+void setup() {
+  Serial.begin(9600);
+  while (!Serial);
+
+  Serial.println("LoRa Receiver");
+
+  if (!LoRa.begin(915E6)) {
+    Serial.println("Starting LoRa failed!");
+    while (1);
+  }
+}
+
+void loop() {
+  // try to parse packet
+  int packetSize = LoRa.parsePacket();
+  if (packetSize) {
+    // received a packet
+    //Serial.print("Received packet '");
+
+    // read packet
+    while (LoRa.available()) {
+      Serial.print((char)LoRa.read());
+    }
+
+    // print RSSI of packet
+    //Serial.print("' with RSS
+    //Serial.println(LoRa.packetRssi());
+  }
+}

lora vers arduino/LoRaSender/LoRaSender.ino

@@ -0,0 +1,33 @@
+#include <SPI.h>
+#include <LoRa.h>
+
+int counter = 0;
+char mes[] = "message :";
+
+void setup() {
+  Serial.begin(9600);
+  while (!Serial);
+
+  Serial.println("LoRa Sender");
+
+  if (!LoRa.begin(915E6)) {
+    Serial.println("Starting LoRa failed!");
+    while (1);
+  }
+}
+
+void loop() {
+  Serial.print("paquet envoyé : ");
+  Serial.println(counter);
+
+  // send packet
+  LoRa.beginPacket();
+  LoRa.print("message : ");
+  LoRa.print(counter);
+  LoRa.print("\n");
+  LoRa.endPacket();
+
+  counter++;
+
+  delay(1000);
+}