flavien
/
LoRaGateway_BTS2A
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

added sdcard support

Browse Source
jd-update
Flavien Haas 6 years ago
parent 1bc26701c1
commit bdfc6ea7ad
2 changed files with 110 additions and 128 deletions
Show Stats Download Patch File Download Diff File

142
WebServer/WebServer/WebServer.ino
Unescape Escape View File

@ -1,85 +1,77 @@
#include <SPI.h>
#include "Ethernet.h"
#include <Ethernet.h>
#include <SD.h>
#define Serial SerialUSB
// Enter a MAC address and IP address for your controller below.
// The IP address will be dependent on your local network:
byte mac[] = {
0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED
};
IPAddress ip(10, 0, 0, 49);
// MAC address from Ethernet shield sticker under board
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
IPAddress ip(10, 0, 0, 20); // IP address, may need to change depending on network
EthernetServer server(80); // create a server at port 80
// Initialize the Ethernet server library
// with the IP address and port you want to use
// (port 80 is default for HTTP):
EthernetServer server(80);
File webFile;
void setup() {
// Open serial communications and wait for port to open:
Serial.begin(9600);
while (!Serial) {
; // wait for serial port to connect. Needed for native USB port only
}
// start the Ethernet connection and the server:
Ethernet.begin(mac, ip);
server.begin();
Serial.print("server is at ");
Serial.println(Ethernet.localIP());
void setup()
{
Ethernet.begin(mac); // initialize Ethernet device
server.begin(); // start to listen for clients
Serial.begin(9600); // for debugging
// initialize SD card
Serial.println("Initializing SD card...");
if (!SD.begin(4)) {
Serial.println("ERROR - SD card initialization failed!");
return; // init failed
}
Serial.println("SUCCESS - SD card initialized.");
// check for index.htm file
if (!SD.exists("index.htm")) {
Serial.println("ERROR - Can't find index.htm file!");
return; // can't find index file
}
Serial.println("SUCCESS - Found index.htm file.");
}
void loop()
{
EthernetClient client = server.available(); // try to get client
void loop() {
// listen for incoming clients
EthernetClient client = server.available();
if (client) {
Serial.println("new client");
// an http request ends with a blank line
boolean currentLineIsBlank = true;
while (client.connected()) {
if (client.available()) {
char c = client.read();
Serial.write(c);
// if you've gotten to the end of the line (received a newline
// character) and the line is blank, the http request has ended,
// so you can send a reply
if (c == '\n' && currentLineIsBlank) {
// send a standard http response header
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: text/html");
client.println("Connection: close"); // the connection will be closed after completion of the response
client.println("Refresh: 5"); // refresh the page automatically every 5 sec
client.println();
client.println("<!DOCTYPE HTML>");
client.println("<html>");
// output the value of each analog input pin
for (int analogChannel = 0; analogChannel < 6; analogChannel++) {
int sensorReading = analogRead(analogChannel);
client.print("analog input ");
client.print(analogChannel);
client.print(" is ");
client.print(sensorReading);
client.println("<br />");
}
client.println("</html>");
break;
}
if (c == '\n') {
// you're starting a new line
currentLineIsBlank = true;
} else if (c != '\r') {
// you've gotten a character on the current line
currentLineIsBlank = false;
}
}
}
// give the web browser time to receive the data
delay(1);
// close the connection:
client.stop();
Serial.println("client disconnected");
}
if (client) { // got client?
boolean currentLineIsBlank = true;
while (client.connected()) {
if (client.available()) { // client data available to read
char c = client.read(); // read 1 byte (character) from client
// last line of client request is blank and ends with \n
// respond to client only after last line received
if (c == '\n' && currentLineIsBlank) {
// send a standard http response header
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: text/html");
client.println("Connection: close");
client.println();
// send web page
webFile = SD.open("index.htm"); // open web page file
if (webFile) {
while(webFile.available()) {
client.write(webFile.read()); // send web page to client
}
webFile.close();
}
break;
}
// every line of text received from the client ends with \r\n
if (c == '\n') {
// last character on line of received text
// starting new line with next character read
currentLineIsBlank = true;
}
else if (c != '\r') {
// a text character was received from client
currentLineIsBlank = false;
}
} // end if (client.available())
} // end while (client.connected())
delay(1); // give the web browser time to receive the data
client.stop(); // close the connection
} // end if (client)
}

96
gateway/gateway.ino
Unescape Escape View File

@ -16,8 +16,9 @@ byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; // set the mac addre
EthernetServer server(80); // initialize the EthernetServer library, using port 80 (default fot HTTP)
typedef struct { // frame structure
uint16_t ID = 1025; // ID
typedef struct { // frame structure
uint8_t ID = 0; // station's ID
uint8_t IDp = 0; // gateway's ID
uint16_t TS = 0; // TimeStamp
uint16_t DT = 0; // Data Type
uint16_t D1 = 0; // DATA 1
@ -27,25 +28,23 @@ typedef struct { // frame structure
trame message; // creation of the frame message
uint16_t ID;
void setup(){
Serial.begin(9600);
while (!Serial); // wait for serial to initialize
Serial.print("Passerelle LoRa\n"); // display on serial the name of the device
if( !LoRa.begin(868E6) ){
if( !LoRa.begin(868E6) ){ // initialise LoRa and display a message if an error occur
Serial.print("Echec de l'initialisation LoRa !\n");
while(true);} // initialize LoRa shield LoRa at 868 MHz
while(true);}
//Ethernet.begin(mac, ip); // initialize Ethernet shield using the set mac adress and set IP
Ethernet.begin(mac); // initialize Ethernet shield uding the set mac and DHCP for the IP
Server.begin(); // initialize WebServer part of the librairy
server.begin(); // initialize WebServer part of the librairy
Serial.print("server is at "); // display on serial the IP you can find the webpage
Serial.println(Ethernet.localIP());
}
//void SerialPrintElapsedTime( boolean espaceFinal=true ){ // to display the elapsed time
//void SerialPrintElapsedTime( boolean espaceFinal=true ){ // to display the elapsed time
// unsigned long h,m,s = millis()/1000;
// m=s/60;
// h=m/60;
@ -56,52 +55,43 @@ void setup(){
void loop() {
// LoRa receiver
String strID = String(message.ID);//0x00
String strTS = String(message.TS);//0x0000
String strDT = String(message.DT);//0x0000
String strD1 = String(message.D1);//0x0000
String strD2 = String(message.D3);//0x0000
String strD3 = String(message.D3);//0x0000
static byte tampon[LENMAX]={0}; // if the module receive a frame, it willnot be null
int longueurTrame;
longueurTrame=LoRa.parsePacket(sizeof(message));
if( longueurTrame > 0 ){
if( longueurTrame>LENMAX ){ // copy of the frame to cache (LENMAX) and verify if the frame is to big
Serial.print("Trame reçue trop grande : ");
Serial.println(longueurTrame);
longueurTrame=LENMAX; // cut the frame to LENMAX size
}
for( int i=0; i<longueurTrame; i++ ){
tampon[i]=(byte)LoRa.read();
}
int packetSize = LoRa.parsePacket();
if (packetSize > 0)
{
SerialUSB.println("Nouveau paquet");
message.ID = LoRa.read();
message.IDp = LoRa.read();
message.IDp = 0x07;
message.TS = ((uint16_t)LoRa.read() | (LoRa.read() << 8));
message.DT = ((uint16_t)LoRa.read() | LoRa.read() << 8);
message.D1 = ((uint16_t)LoRa.read() | LoRa.read() << 8);
message.D2 = ((uint16_t)LoRa.read() | LoRa.read() << 8);
message.D3 = ((uint16_t)LoRa.read() | LoRa.read() << 8);
SerialUSB.println(message.ID, HEX);
SerialUSB.println(message.IDp, HEX);
SerialUSB.println(message.TS, HEX);
SerialUSB.println(message.DT, HEX);
SerialUSB.println(message.D1, HEX);
SerialUSB.println(message.D2, HEX);
SerialUSB.println(message.D3, HEX);
delay(100);
}
// SerialPrintElapsedTime(); // diplay the time the frame arrived
Serial.print("0x");
for( int i=0; i<longueurTrame; i++ ){ // display the frame in hexadecimal
if( tampon[i] < 0x0F ) Serial.print("0");
Serial.print( tampon[i], HEX );
}
Serial.print( " " );
for( int i=0; i<longueurTrame; i++ ){
if( (tampon[i] < 0x20)||(tampon[i] > 0x7E) ){
Serial.print( "."); // this character isn't printable (displayable)
}
else{
Serial.print( (char)tampon[i] ); // display the frame in ASCII
Serial.println("\nTaille du pacquet reçu en octets: "+LENMAX);
Serial.println("ID Passerelle et station reçus : "+strID);
Serial.println("Timestamp reçue : "+strTS);
Serial.println("Type de données reçus : "+strDT);
Serial.println("Champ de données 1 reçus : "+strD1);
Serial.println("Champ de données 2 reçus : "+strD2);
Serial.println("Champ de données 3 reçus : "+strD3);
}
}
Serial.print( "\n" );
} // end of if LoRa.parsePacket
delay(10);
// post to server
String postdata="&ID="+message.ID+"&IDp="+message.IDp+"&TS="+message.TS+"&DT="+message.DT+"&D1="+message.D1+"&D2="+message.D2+"&D3="+message.D3;
bool connected = client.connect(server, 80);
if (connected){
client.println("POST /formulaireCollecte.html HTTP/1.1");
client.println("Host: btslimayrac.ovh");
client.println("Cache-Control: no-cache");
client.println("Content-Type: application/x-www-form-urlencoded");
client.print("Content-Length: ");
client.println(postData.length());
client.println(postData);
}
// WebServer
EthernetClient client = server.available(); // WebServer :listen for incoming clients
if (client) {

Write Preview
Loading…
Cancel
Save