You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
121 lines
4.8 KiB
C++
121 lines
4.8 KiB
C++
// Flavien HAAS, 2018
|
|
// to compile as on the diagrams, check that you have changed the SS port as indicated on the README
|
|
|
|
#include <SPI.h> // to communicate using spi (required for our shields)
|
|
#include <LoRa.h> // to use the LoRa shield
|
|
#include "Ethernet.h" // to use the ethernet shield
|
|
#include "util.h" // to have the display of the elapsed time
|
|
|
|
#define LENMAX 80 // maximum size for the LoRa frame
|
|
#define Serial SerialUSB // serial out on the M0 use a different function
|
|
|
|
// void setSPIFrequency(uint32_t frequency); // set the SPI at 8MHz to use logic analyser
|
|
|
|
byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; // set the mac address
|
|
|
|
//IPAddress ip(10, 0, 0, 49); //set the IP address for the ethernet shield, overwise the librairy use DHCP
|
|
|
|
EthernetServer server(80); // initialize the EthernetServer library, using port 80 (default fot HTTP)
|
|
|
|
void setup(){
|
|
Serial.begin(9600);
|
|
while (!Serial); // wait for serial to initialize
|
|
Serial.print("Passerelle LoRa\n"); // display on serial the name of the device
|
|
|
|
if( !LoRa.begin(868E6) ){
|
|
Serial.print("Echec de l'initialisation LoRa !\n");
|
|
while(true);} // initialize LoRa shield LoRa at 868 MHz
|
|
|
|
//Ethernet.begin(mac, ip); // initialize Ethernet shield using the set mac adress and set IP
|
|
Ethernet.begin(mac); // initialize Ethernet shield uding the set mac and DHCP for the IP
|
|
server.begin();
|
|
Serial.print("server is at ");
|
|
Serial.println(Ethernet.localIP());
|
|
}
|
|
|
|
void loop() {
|
|
static byte tampon[LENMAX]={0};
|
|
int longueurTrame;
|
|
// si le module a reçu une trame alors sa longueur sera non nulle
|
|
longueurTrame=LoRa.parsePacket();
|
|
if( longueurTrame > 0 ){
|
|
//---- copie de la trame depuis le modem vers le tampon ----
|
|
if( longueurTrame>LENMAX ){
|
|
Serial.print("Trame reçue est trop grande pour le tampon : ");
|
|
Serial.println(longueurTrame);
|
|
longueurTrame=LENMAX; // troncature
|
|
}
|
|
for( int i=0; i<longueurTrame; i++ ){
|
|
tampon[i]=(byte)LoRa.read();
|
|
}
|
|
//---- affichage de l'heure d'arrivée ----
|
|
SerialPrintElapsedTime();
|
|
//---- affichage en hexadécimal ----
|
|
Serial.print("0x");
|
|
for( int i=0; i<longueurTrame; i++ ){
|
|
if( tampon[i] < 0x0F ) Serial.print("0");
|
|
Serial.print( tampon[i], HEX );
|
|
}
|
|
//---- affichage en ASCII ----
|
|
Serial.print( " " );
|
|
for( int i=0; i<longueurTrame; i++ ){
|
|
if( (tampon[i] < 0x20)||(tampon[i] > 0x7E) ){
|
|
Serial.print( "."); // ce caractère est non imprimable
|
|
}else{
|
|
Serial.print( (char)tampon[i] );
|
|
}
|
|
}
|
|
Serial.print( "\n" );
|
|
}//if LoRa.parsePacket
|
|
delay(10);
|
|
// listen for incoming clients
|
|
EthernetClient client = server.available();
|
|
if (client) {
|
|
Serial.println("new client");
|
|
// an http request ends with a blank line
|
|
boolean currentLineIsBlank = true;
|
|
while (client.connected()) {
|
|
if (client.available()) {
|
|
char c = client.read();
|
|
Serial.write(c);
|
|
// if you've gotten to the end of the line (received a newline
|
|
// character) and the line is blank, the http request has ended,
|
|
// so you can send a reply
|
|
if (c == '\n' && currentLineIsBlank) {
|
|
// send a standard http response header
|
|
client.println("HTTP/1.1 200 OK");
|
|
client.println("Content-Type: text/html");
|
|
client.println("Connection: close"); // the connection will be closed after completion of the response
|
|
client.println("Refresh: 5"); // refresh the page automatically every 5 sec
|
|
client.println();
|
|
client.println("<!DOCTYPE HTML>");
|
|
client.println("<html>");
|
|
// output the value of each analog input pin
|
|
for (int analogChannel = 0; analogChannel < 6; analogChannel++) {
|
|
int sensorReading = analogRead(analogChannel);
|
|
client.print("analog input ");
|
|
client.print(analogChannel);
|
|
client.print(" is ");
|
|
client.print(sensorReading);
|
|
client.println("<br />");
|
|
}
|
|
client.println("</html>");
|
|
break;
|
|
}
|
|
if (c == '\n') {
|
|
// you're starting a new line
|
|
currentLineIsBlank = true;
|
|
} else if (c != '\r') {
|
|
// you've gotten a character on the current line
|
|
currentLineIsBlank = false;
|
|
}
|
|
}
|
|
}
|
|
// give the web browser time to receive the data
|
|
delay(1);
|
|
// close the connection:
|
|
client.stop();
|
|
Serial.println("client disconnected");
|
|
}
|
|
}
|