integration of LoRa + Ethernet
flavienhaas
7 years ago
parent
6912a21909
commit
0b6c79ee7a
@ -0,0 +1,125 @@
|
||||
#include <SPI.h>
|
||||
#include <LoRa.h>
|
||||
#include "Ethernet.h"
|
||||
#include "util.h" // pour avoir l'affichage du temps écoulé
|
||||
|
||||
#define LENMAX 80 // taille maximale acceptée pour la trame
|
||||
#define Serial SerialUSB
|
||||
|
||||
// void setSPIFrequency(uint32_t frequency); // 8MHz par défaut c'est bq pour l'analyseur logique
|
||||
|
||||
// Enter a MAC address and IP address for your controller below.
|
||||
// The IP address will be dependent on your local network:
|
||||
byte mac[] = {
|
||||
0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED
|
||||
};
|
||||
IPAddress ip(10, 0, 0, 49);
|
||||
|
||||
// Initialize the Ethernet server library
|
||||
// with the IP address and port you want to use
|
||||
// (port 80 is default for HTTP):
|
||||
EthernetServer server(80);
|
||||
|
||||
void setup(){
|
||||
Serial.begin(9600);
|
||||
while (!Serial);
|
||||
Serial.print("Recepteur LoRa\n");
|
||||
// initialiser le shield LoRa en 868 MHz
|
||||
if( !LoRa.begin(868E6) ){
|
||||
Serial.print("Echec de l'initialisation LoRa !\n");
|
||||
while(true); // on se bloque ici et on ne va pas plus loin
|
||||
}
|
||||
Ethernet.begin(mac, ip);
|
||||
server.begin();
|
||||
Serial.print("server is at ");
|
||||
Serial.println(Ethernet.localIP());
|
||||
}
|
||||
|
||||
void loop() {
|
||||
static byte tampon[LENMAX]={0};
|
||||
int longueurTrame;
|
||||
// si le module a reçu une trame alors sa longueur sera non nulle
|
||||
longueurTrame=LoRa.parsePacket();
|
||||
if( longueurTrame > 0 ){
|
||||
//---- copie de la trame depuis le modem vers le tampon ----
|
||||
if( longueurTrame>LENMAX ){
|
||||
Serial.print("Trame reçue est trop grande pour le tampon : ");
|
||||
Serial.println(longueurTrame);
|
||||
longueurTrame=LENMAX; // troncature
|
||||
}
|
||||
for( int i=0; i<longueurTrame; i++ ){
|
||||
tampon[i]=(byte)LoRa.read();
|
||||
}
|
||||
//---- affichage de l'heure d'arrivée ----
|
||||
SerialPrintElapsedTime();
|
||||
//---- affichage en hexadécimal ----
|
||||
Serial.print("0x");
|
||||
for( int i=0; i<longueurTrame; i++ ){
|
||||
if( tampon[i] < 0x0F ) Serial.print("0");
|
||||
Serial.print( tampon[i], HEX );
|
||||
}
|
||||
//---- affichage en ASCII ----
|
||||
Serial.print( " " );
|
||||
for( int i=0; i<longueurTrame; i++ ){
|
||||
if( (tampon[i] < 0x20)||(tampon[i] > 0x7E) ){
|
||||
Serial.print( "."); // ce caractère est non imprimable
|
||||
}else{
|
||||
Serial.print( (char)tampon[i] );
|
||||
}
|
||||
}
|
||||
Serial.print( "\n" );
|
||||
}//if LoRa.parsePacket
|
||||
delay(10);
|
||||
// listen for incoming clients
|
||||
EthernetClient client = server.available();
|
||||
if (client) {
|
||||
Serial.println("new client");
|
||||
// an http request ends with a blank line
|
||||
boolean currentLineIsBlank = true;
|
||||
while (client.connected()) {
|
||||
if (client.available()) {
|
||||
char c = client.read();
|
||||
Serial.write(c);
|
||||
// if you've gotten to the end of the line (received a newline
|
||||
// character) and the line is blank, the http request has ended,
|
||||
// so you can send a reply
|
||||
if (c == '\n' && currentLineIsBlank) {
|
||||
// send a standard http response header
|
||||
client.println("HTTP/1.1 200 OK");
|
||||
client.println("Content-Type: text/html");
|
||||
client.println("Connection: close"); // the connection will be closed after completion of the response
|
||||
client.println("Refresh: 5"); // refresh the page automatically every 5 sec
|
||||
client.println();
|
||||
client.println("<!DOCTYPE HTML>");
|
||||
client.println("<html>");
|
||||
// output the value of each analog input pin
|
||||
for (int analogChannel = 0; analogChannel < 6; analogChannel++) {
|
||||
int sensorReading = analogRead(analogChannel);
|
||||
client.print("analog input ");
|
||||
client.print(analogChannel);
|
||||
client.print(" is ");
|
||||
client.print(sensorReading);
|
||||
client.println("<br />");
|
||||
}
|
||||
client.println("</html>");
|
||||
break;
|
||||
}
|
||||
if (c == '\n') {
|
||||
// you're starting a new line
|
||||
currentLineIsBlank = true;
|
||||
} else if (c != '\r') {
|
||||
// you've gotten a character on the current line
|
||||
currentLineIsBlank = false;
|
||||
}
|
||||
}
|
||||
}
|
||||
// give the web browser time to receive the data
|
||||
delay(1);
|
||||
// close the connection:
|
||||
client.stop();
|
||||
Serial.println("client disconnected");
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
Loading…
Reference in New Issue